Product description
Universal Dual Power Fireplace Remote Control Kit
3-YR Limited with Free New Product Replacement
-
Manual Mode
Press ON button once to turn on the appliance
Press OFF button once again to turn off the appliance
-
Thermostatic Mode
Press the ”MODE” button to enter the thermostatic mode
ROOM and TEMP icon appear on lower LCD screen
-
Child Safety Lock
Press and hold ON and MODE button at same time for 5 seconds to activate child proof mode
INSTALLATION STEPS
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Casmer INSTALLATION STEPS
TROUBLESHOOTING STEPS
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Casmer TROUBLESHOOTING STEPS
Vine Customer Review of Free Product
Must-read Before Purchase
| Compatible Brands | Common replacement brands: skytech, napoleon, heatilator, majestic, vermont castings, empire, mendota, kingsman, valor, regency, monessen, acumen, ambient technologies. |
| Attention: | Our product has not been authorized by the original brand, and all brands and models mentioned in the product description indicate compatibility |
| Common Models | Fit for skytech fireplace(sky-1001, sky-1420,1001-A,1001TX, 3001). Fit for napoleon ( F45 GL22 GL28 GL32 GD36PTR central). Fit for regency fireplace (P121-NG P121-LPG) |
| Dual Power Fireplace Remote | The Casmer Fireplace Remote Control Kit enjoy two power options for non-stop operation. Achieve functions such as opening and closing the fireplace, temperature adjustment, child protection, and switching between ℃ and ℉. It also features flame markers and a backlit LCD screen. |
| Millivolt Valve Control Only | Note: The product can only control millivolt valves and the receiver will not release any voltage. Unable to control locking solenoid valves, servo motors, stepper motors, etc. Please carefully check the valve type before purchasing. |
| About Millivolt Valve | This type of valve makes use of a standing pilot that continuously burns to heat a device, either a thermocouple or thermopile, which then produces a small amount of electricity – less than a single volt, hence “milli”-volt. This small amount of electricity provides enough of a current to control an electromagnet that pulls the valve open against a spring; if the current isn’t present, the valve will snap shut and turn off the gas. A remote control will not provide power to your valve. |
| Batteries Not Included | Our product does not contain batteries, you will need to bring your own (2) “AAA” and (4) “AA” batteries |
- Widely Compatible: Casmer fireplace remote control adopts a universal design, has undergone extensive compatibility testing, and can be replaced sktech ,ambient, majestic, monessen,vermont castings,acumen,napoleon,rasmussen,superior,grand canyon,iFlame,real fyre,hargrove And more brands of millivolt gas valve fireplaces.Please refer to the product description below for compatible models.If you need to purchase a fireplace controlled by a locking solenoid valve and servo motor (UN3 con-th sr-1001 Sky-mrck 9800335), This product cannot meet your needs
- Dual Power Options: Gas Fireplace Remote Control Kit enjoy two power options for non-stop operation. Power the receiver with 4 AA alkaline batteries (not included) for wire-free flexibility. Alternatively, you can opt for the AC100~230VAC to 5VDC 1A adapter included in our package for continuous power supply. It saves costs, cuts out the hassle of frequent battery replacements, and eliminates worries about power outages
- Slashing Fuel Costs: In thermostat mode, the remote automatically shuts off the fireplace when room temperature exceeds your set point by 1℉ and reignites it when it drops 1℉ below—no more wasting gas on overheating. This smart regulation ensures consistent warmth without constant manual checks, slashing fuel costs over time. For quick, targeted heating, switch to manual mode to turn the fireplace on/off instantly—use only as much fuel as you need, no idle burning
- Reliable Child Safety Lock: Keep little hands from accidental fireplace operation with the Child Proof Lock (CP Mode)—activated in seconds by holding the ON and MODE buttons together for 5 seconds. Once locked, the remote displays “CP” on the LCD to confirm, and all buttons become unresponsive until you unlock it the same way. So you can enjoy cozy fires without stressing about unintended use
- Easy to Install: Connect the two wires from the receiver to the“TP TH” and “TH” terminals on your gas valve—no polarity issues (either wire to either terminal works). For electric spark ignition: Wire the receiver in series with your 24VAC transformer and the ignition module’s “TH” terminalSlide the receiver’s switch to “REMOTE”, hold the “LEARN” button until it beeps, then press the remote’s “ON”/“OFF” once—receiver beeps again to confirm pairing
- Universal Fireplace Remote Control Kit: 1 Thermostat remote control Transmitter, 1 receiver box,1 white color slide button, 1 white color wall cover plate, wiring assembly – 20” inches, 1 ac100~230vac to 5vdc 1a adaptor, 4 #6 3/4 screws (for wall cover plate and remote control), 2 #6 3/4 screws (for fireplace system control covers), 2 plastic wall anchors (for installing transmitter), 1 installation instructions
- Important Note: You cannot use a single component (only the remote or only the receiver) with existing parts—separate replacement of either piece will result in signal mismatch. The transmitter is programmed to communicate only with its original receiver, and the receiver will only respond to its paired remote (not other brands or standalone units). For reliable, full functionality, the kit must be installed and used as a complete set—this ensures seamless pairing, safety features, and consistent performance
Reviews
There are no reviews yet.